Mitsubishi Electric GOT2000 Series User Manual page 328

■1. Password input operation procedure
The following describes the procedure for inputting the password for changing the servo parameters.
(1) Functions
If the input password matches, the parameter setting screen is displayed.
If the input password does not match, an error message is displayed.
Touching the [×] key returns to the function selection menu screen.
Numerical numbers and letters A to F can be used for a password.
(2) Operations
(a) Inputting the password
Touch [0] key to [9] key and [A] key to [F] key to input the password.
After inputting the password, touch [Enter] key to set the password.
To edit the input characters, touch [Del] key to delete the characters, and then input the new characters.
(b) Canceling password input
Touch the [×] key to return to the monitor screen.
■2. Parameter setting screen
The following describes the display data of the parameter setting screen and the key functions displayed on the screen.
Parameters with an asterisk (*) preceding the name become valid after the parameters are set and the power of the
servo amplifier is turned off and then on again.
(1) Display screen
1) [Pr.]
Displays the parameter number.
2) [Name]
Displays the parameter name.
3) [Value]
Displays the present set value of the parameter.
9 - 28
9.4 Operations of Servo Amplifier Monitor Screens
1) 2) 3) 4)