3.3.10
Monitoring local devices ([Local monitor])
Monitor local devices.
■1. Monitoring procedure of local devices
The entry monitor is taken here as an example to describe the switch procedure for the display.
Step 1.
Touch the [Local monitor] key in each monitor.
[Local monitor] key
Step 2.
The program list dialog appears.
Select the target file for the local device monitor and touch the [Cancel] key.
1) Program file list
Represents the program file list of the local device monitor target.
A file can be selected by touching the file name.
2) [Cancel] key
Closes the program list dialog without starting the local device monitor.
3) [OK] key
Starts the local device monitor of the selected program.
Step 3.
The confirmation dialog appears.
Touching the [OK] key starts the local device monitor.
Touching the [Cancel] key cancels the local device monitor.
POINT
POINT
POINT
Scan time while the GOT is using the local device monitor
When the GOT is using the local device monitor, the scan time for the PLC increases.
1)
2)
3)
3.3 Operations Common to the Monitor Screens
3
3 - 31