Mitsubishi Electric GOT2000 Series User Manual page 81

Item
Display format
7) Message display
Displays error messages.
8) [Register] key
Registers devices.
Displays the device entry window when touched.
➠ 3.3.5 ■2. Window for entering the device
9) [Delete] key
Deletes a selected registered device.
➠
3.3.6 Deleting a device ([Delete])
10) [Delete all] key
Deletes all the registered devices.
➠
3.3.7 Deleting devices at a time ([Delete all])
11) [Test] key
Carries out a test operation.
➠ 3.3.8 Test operation for the monitor device ([Test])
12) [Layout] key
Changes the display of items.
The display of the following items can be changed.
• Number of the columns of the devices to be displayed
• Comments (can be switched between displaying and hiding)
➠
3.3.9 Switching the display (number or columns, comment display) ([Layout])
13) [Change comment] key
The comment file to be displayed can be switched.
Touch the key to display the comment file list dialog.
➠
3.3.11 File switching for comment display ([Change comment])
14) [Local monitor] key
Starts or ends the local device monitor.
➠ 3.3.10 Monitoring local devices ([Local monitor])
15) [Connect] key
Switches the monitor target for the device monitor.
Touch the key to display the communication setting dialog.
➠
3.3.4 ■2. Communication setting dialog
Represents the display format of the device value.
The character on the left represents the data range of the device.
• [W]: Word (16 bits)
• [D]: Double-word (32 bits)
• [L]: Longword (64 bits)
The character string on the right represents the display format of the device value.
• [K±]: Signed decimal
• [K+]: Unsigned decimal
• [HEX]: Hexadecimal
• [BIN]: Binary
• [EXP]: Exponential notation
• [FIT]: Decimal representation
The display format can be changed when touched.
Description
3.4 Entry Monitor
3
3 - 37