Mitsubishi Electric GOT2000 Series User Manual page 160

Step 2.
In the SEQCMNT folder, create folders for CH No., network No., station No., and CPU No. of the
monitored controller with a hierarchy as shown below.
CH No.
Network No.
Station No.
CPU No.
Assign numbers to "*" marks.
(When the CH No. is 1, the folder name is CH01. When the monitor target is the host station, the folder
name is ST255.)
Step 3.
In the CPU No. folder, create folders for storing comment files by character code.
Folder for SJIS code
Folder for KS code
Folder for GB code
Folder for ASCII code
Step 4.
Copy a comment file (.wcd) in the saved project.
When the GX Works2 project is used, the creation method of a comment file (.wcd) differs depending on
whether the project used can be or cannot be saved in the GX Developer format.
• Project that can be saved in the GX Developer format
A comment file (.wcd) is created when the project is saved in the GX Developer format.
• Project that cannot be saved in the GX Developer format
Export the project by using [Write IC Memory Card] of GX Works2, and change the extension of the
comment file from [.qcd] to [.wcd].
5 - 10
5.3 Operations for Display
Item
Item
Folder name
CH**
NET***
ST***
CPU**
Channel No.
Network No.
Station No.
CPU No.
Folder name
SJIS
KS
GB
ASCII
CPU No.
For storing comments with
ASCII code
For storing comments with
GB code
For storing comments with
KS code
For storing comments with
SJIS code