15.3 Operations for Display
This section describes how to display the FX list editor screen after the GOT is turned on.
Starting from the
utility
*1
Display the utility.
After the utility is displayed, touch
[Monitor] → [MELSEC-FX List editor]
from the Main Menu.
Set the Channel No.
Set the channel number of
the controller targeted to the
MELSEC-FX list editor.
When no keyword
is registered in the
connected FX PLC
The MELSEC-FX list editor is started.
*1
*2
*3
*4
15 - 6
15.3 Operations for Display
Touch the special function switch.
For how to display the utility, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
For how to set special function switches, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
Refer to the following for the FX ladder monitor.
➠
13. FX LADDER MONITOR
For the details, refer to the following.
➠
15.4.11 Keywords
Start
Turn on the GOT.
Starting from the special function
switch (MELSEC-FX list editor)
set in the project data
*2
End
When starting the List
editor for MELSEC-FX
from the ladder monitor
Activate the MELSEC-FX list editor
on the Ladder monitor screen.
Touch "List"
Communication
setting window
When a keyword is
registered in the
connected FX PLC
*4
Enter the keyword.
*3