Mitsubishi Electric GOT2000 Series User Manual page 93

■2. Connection type
This function can be used in the following connection types.
(○: Available, ×: Unavailable)
Function
Name Description
Monitors and edits a
sequence sequence program in
program the ladder diagram
monitor format in a controller, or
(ladder) changes current device
values of the program.
*1 The LCPU does not support the connection type.
*2 When the GOT is connected to LCPU, use L6ADP-R2.
*3 For the MELSECNET/10 connection, use a QCPU and network module (QJ71LP21, QJ71LP21-25, QJ71LP21S-25,
QJ71LP21G, and QJ71BR11) with the function version B or later.
*4 Indicates the CC-Link IE controller network connection.
*5 Indicates CC-Link IE field network connection.
*6 Q00JCPU, Q00CPU, Q01CPU, Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU and Q25HCPU are not available.
*7 Indicates CC-Link connection (Intelligent device station).
*8 Indicates CC-Link connection (via G4).
*9 Ladder editor cannot be used when using CC-Link IE field network Ethernet adapter.
■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠ 1.2 System Applications (Extended Functions) Required for Each Function
(1) System application (extended function)
Write the package data that contains the system applications (extended functions) for the sequence program monitor
(Ladder) and the sequence program monitor (R ladder) to the GOT.
For the communication method with the GOT, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠ GT Designer3 (GOT2000) Screen Design Manual
■4. Required hardware
The following hardware is required.
Hardware
Data Storage (SD card, USB memory, and etc)
Connection form between GOT and controller
Direct
Bus
Serial
CPU
connection
communication
connection
*1 connection
*2
○ ○ ○
MELSECNET/H
Ethernet
*1
connection ,
connection
connection
MELSECNET/10
*9 CC-Link IE field
*1*3
connection
connection
○ ○
4.2 Specifications
CC-Link IE CC-Link
controller connection
*1*4
,
*7 *8
ID G4
*5*6
4
○ ○ ○
4 - 5