Clear Lacp Counters - Cisco ASR 14000 Series Command Reference Manual

Link Bundling Commands on Cisco IOS XR Software

clear lacp counters

To clear Link Aggregation Control Protocol (LACP) counters for all members of all bundles, all
members of a specific bundle, or for a specific port, use the clear lacp counters command in EXEC
mode.
Syntax Description bundle
Bundle-Ether node-id
Bundle-POS bundle-id Specifies the POS bundle whose LACP counters you want to clear. Replace
port
GigabitEthernet
TenGigE
POS
interface-path-id
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
bundle
basic-services
OL-17228-01
clear lacp counters [bundle {Bundle-Ether bundle-id | Bundle-POS bundle-id} | port
{GigabitEthernet interface-path-id | TenGigE interface-path-id | POS interface-path-id}]
(Optional) Clears LACP counters for all members of a bundle.
Specifies the Ethernet bundle whose LACP counters you want to clear.
Replace node-id with a number. Range is from 1 through 65535.
bundle-id with a bundle identifier. Range is from 1 through 65535.
(Optional) Clears all LACP counters on the specified bundle or interface.
Specifies the Gigabit Ethernet interface whose LACP counters you want to
clear.
Specifies the TenGigE interface whose LACP counters you want to clear.
Specifies the Packet-over-SONET/SDH (POS) interface whose LACP port
counters you want to clear.
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
execute
read, write
Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
clear lacp counters
HR-147