Show Ip Dhcp Binding - Cisco 32369 Manual

show ip dhcp binding

To display address bindings on the Cisco IOS Dynamic Host Configuration Protocol (DHCP)
Server, use the show ip dhcp binding EXEC command.
show ip dhcp binding [address]
Syntax Description
address
Defaults
None
Command Modes
EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0(1)T.
If the address is not specified, all address bindings are shown. Otherwise, only the binding for the
specified client is displayed.
Examples
The following examples show the DHCP binding address parameters, including an IP address, an
associated MAC address, a lease expiration date, and the type of address assignment that have
occurred. Table 2 lists descriptions of the fields in each example.
Router> show ip dhcp binding 172.16.1.11
IP address
172.16.1.11
Router> show ip dhcp binding 172.16.3.254
IP address
172.16.2.254
Table 2
Field
IP address
Hardware address
Lease expiration
Type
(Optional) Specifies the IP address of the DHCP client for which
bindings will be displayed.
Hardware address
00a0.9802.32de
Hardware address
02c7.f800.0422
show ip dhcp Field Descriptions
Description
The IP address of the host as recorded on the DHCP server.
The MAC address or client identifier of the host as recorded
on the DHCP server.
The lease expiration date of the IP address of the host.
The manner in which the IP address was assigned to the host.
Lease expiration
Feb 01 1998 12:00 AM
Lease expiration
Infinite
show ip dhcp binding
Type
Automatic
Type
Manual
Cisco IOS DHCP Server 43