Table of Contents
Advertisement
Document Revision History
Document Revision History
Table 1
Table 1
Cisco IOS
Release
12.2(33)SB
12.2(34)SB
Organization
This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Index
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
viii
records technical changes to this document.
Document Revision History
Revision
OL-13838-01
OL-13838-02
Title
SIP and SPA Product Overview
Cisco 10000 Series Router SPA
Interface Processor-600
Cisco 10000 Series Router Shared
Port Adapters
Preparing to Install a SIP or a SPA
Installing and Removing a SIP
Installing and Removing a SPA
Troubleshooting the Installation
Date
Change Summary
April 2008
First release.
August 2008
Introduced the following new hardware
on the Cisco 10000 series router for the
PRE4.
•
•
Description
Provides an introduction to the SPA interface
processor (SIP) and shared port adapters (SPAs).
Provides a SIP and SPA compatibility summary.
For each supported SIP, provides a summary of
SIP characteristics.
Provides a summary of SPA characteristics for
each supported SPA.
Describes the required tools, equipment, and
safety guidelines for installing SIPs and SPAs.
Describes the procedures for installing and
removing a SIP on a Cisco 10000 series router.
Describes the procedures for installing and
removing a SPA on a Cisco 10000 series router. It
also describes how to verify the SIP and SPA
installation.
Provides information for troubleshooting the
installation of SIPs and SPAs. It also lists helpful
debug commands and error messages.
About This Guide
Introduced the 8-port Gigabit
Ethernet Shared Port Adapter (SPA).
Introduced the 2-port channelized
OC-12/DS0 SPA.
OL-13838-02
Advertisement
Table of Contents
