Packing Materials - Recycling Information - GE LOGIQ E9 Service Manual

GE
D 5535208-100, R
IRECTION
Table 3-3
11. Disconnect the tie-down strap at the rear of
the LOGIQ E9.
12. Pull the LOGIQ E9 down the Pallet Base
ramp.
Note: Remember to pull in the LOGIQ E9
from the back for safer transportation.
13. Remove the clear plastic (wrapped around
the LOGIQ E9) from the unit.
14. Place all of the filling inside the
Transportation Box. Close the box, and
store the filling for possible future use.
Section 3-4

Packing materials - recycling information

The packing materials for LOGIQ E9 are recyclable:
• The Transportation Box is made of cardboard.
• Lever lockings (hinges) are made of zinc plated steel.
• The inner reinforcements are made of Ethafoam (Polyethylene foam).
• The plastic foil is made of LDPE (Low Density Polyethylene).
3 - 12
. 2
EV
Uncrating Instructions (Continued)
Steps
Section 3-4 - Packing materials - recycling information
LOGIQ E9 S
ERVICE
Corresponding Graphic
M
ANUAL