GE LOGIQ E9 Service Manual page 286

GE
D 5535208-100, R
IRECTION
7-5-6-8 Touch Screen Tab
Test the Touch Screen functionality by pressing on the Touch Screen of the upper operator panel. Verify
that the press is indicated in the black window by a highlighted circle. See:
Touch screen and verify dots follow/
Calibrate: Press and hold each touch
target until it moves to next target.
7 - 38
. 2
EV
Figure 7-45 Touch Screen Tab - R4 and earlier
Figure 7-46 Touch Screen Tab - R5 and later
Section 7-5 - Common Service Desktop
Check calibration:
Select Touch screen test, press each
target as they appear/Calibrate: Press
Run Windows calibration. Press very
lightly on each target until it moves to
LOGIQ E9 S
Figure 7-45
next location.
M
ERVICE ANUAL
or Figure 7-46.