GE LOGIQ E9 Service Manual page 578

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5535208-100, R

Table 8-144 HDD removal

Remove the two Phillips screws securing

the HDD and Bracket to the BEP frame.

Pull/slide the HDD out of the BEP, and

Bracket to the BEP frame. Slight force may

need to be applied since the HDD fits tightly

into the BEP motherboard.

If the HDD has patient data, leave the HDD

at the site.

Note the HDD installation guides.

Section 8-9 - BEP (Back End Processor) parts replacement

Corresponding Graphic

HDD mounting screws

HDD installation guides