GE LOGIQ E9 Service Manual page 573

GE
D 5535208-100, R
IRECTION
8-9-6-1 HDD removal
If the HDD has patient data, leave the HDD at the site.
Table 8-140 HDD removal
1.
Loosen the thumb screw or screws at the top of the BEP cover that attach the cover to the BEP.
Tilt the top of the BEP cover away from the BEP.
2.
Disconnect:
• the battery cable from J3 on the EPS
(Extended Power Shutdown) Board.
• the cables (1) connecting the EPS to the
BEP.
Set the BEP cover aside.
3.
Remove the screw that secures the HDD
bracket.
. 2
EV
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
Corresponding Graphic
inside of BEP Cover, EPS and cables
M
ERVICE ANUAL
8 - 227