GE LOGIQ E9 Service Manual page 477

GE
D 5535208-100, R
IRECTION
8-6-8 Upper Operator Panel / Touch Panel Assembly replacement
8-6-8-1 Upper OP Panel/Touch Panel Assembly removal
Table 8-87
1. Make sure that the OP Panel is in its
uppermost position, with the LCD out of the
way:
2. Remove the five OP Panel Knobs.
Failure to remove the five OP Panel Knobs first, could cause damage to the knob shafts.
3. At the rear of the system, release the
frogleg mechanism for the console by
inserting a screwdriver into the release
point and pressing until release. Pull the
console out to its extended position to gain
access to the screws in the next step.
. 2
EV
Upper OP Panel/Touch Panel Assembly removal
Steps
NOTICE
Chapter 8 Replacement procedures
LOGIQ E9 S
Corresponding Graphic
OP Panel/Touch Panel Assembly
L O G I Q L O G I Q
1
2
CW
Logiq
Εlasto V Nav Contrast
View
Measure
Comment
Clear
XY / Frogleg mechanism release
M
ERVICE ANUAL
PDI
Steer Width
CHI
Depth
Zoom
3D/4D
Auto
L R
P4
Freeze
P1 P2
P3
8 - 131