GE LOGIQ E9 Service Manual page 560

GE
D 5535208-100, R
IRECTION
Table 8-127 BEP installation
5. Reach inside the BEP and connect the
BEP cable to the Backplane J2 (left) on a
MRX Configuration.
MAKE sure the BEP Cable to the
Backplane for BEP6 is installed as shown.
DO NOT twist.
Or, the Backplane cable, J3 (right) and J5
PCIe to the Card Rack on a GFI
Configuration, using a BEP6.
8 - 214
. 2
EV
Steps
Section 8-9 - BEP (Back End Processor) parts replacement
LOGIQ E9 S
Corresponding Graphic
BEP Cable to MRX Backplane, J2
BEP Cable to Backplane J3 of GFI Configuration
(view inside the BEP)
M
ERVICE ANUAL