GE LOGIQ E9 Service Manual page 459

GE
D 5535208-100, R
IRECTION
8-6-3-3 LCD Monitor V2 Arm assembly replacement - R5.x and later (cont'd)
Table 8-70
1.
WHEN INSTALLING THE LCD ARM ASSEMBLY, KEEP THE LCD ARM IN THE LOCKED
POSITION. THE SPRINGS TO SUPPORT THE LCD CAN CAUSE THE ARM TO SPRING
OPEN CAUSING SEVERE PERSONAL INJURY AND PROPERTY DAMAGE.
2.
Make sure the Bushing is installed and
positioned in the orientation shown. The
larger hole in the Bushing is to
accommodate the pin.
. 2
EV
LCD Monitor V2 Arm assembly installation - R5 and later
Steps
WARNING WARNING
Chapter 8 Replacement procedures
LOGIQ E9 S
ERVICE
Corresponding Graphic
M
ANUAL
8 - 113