GE LOGIQ E9 Service Manual page 379

GE
D 5535208-100, R
IRECTION
8-5-2-2 Side Covers removal
1. NOTE: If the left Side Cover was removed,
MAKE SURE to clear the BEP Fan(s)
intake(s) of any debris, before installing the
cover.
Align tabs at the top inside of the Side
Cover with the slots on the Top Cover.
Place the top edge of the Side Cover so it
hooks onto the Top Cover.
2.
Align and squeeze the front edge of the side
cover to latch it into place.
Position the Side Cover side lock first.
Position the Side Cover front lock.
Align and squeeze the bottom front of the
side cover to latch it into place.
Position the Side Cover rear lock, lifting up
the rear tab and guiding it into place.
Align and squeeze the bottom rear of the
side cover to latch it into place. Repeat
steps for the opposite side.
. 2
EV
Table 8-5 Side Covers removal
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
ERVICE
Corresponding Graphic
M
ANUAL
8 - 33