GE LOGIQ E9 Service Manual page 527

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5535208-100, R

Bottom Filter installation (looped type strap)

Removal Process with Looped Strap

1.) Locate the looped strap on the right hand side of the LOGIQ E9, which can be viewed through the

right rear wheel well.

2.) Insert the first and second fingers of your right hand through the filter removal loop.

3.) Using the first and second fingers of the your hand, lever down on the filter removal loop and the

fingers of the right hand.

This action will prevent your fingers from being struck by the filter when you remove it and it

Figure 8-56 Bottom Filter Looped Strap (located in wheel well)

Figure 8-57 Placement of Fingers in Looped Strap

Chapter 8 Replacement procedures