GE LOGIQ E9 Service Manual page 577

GE
D 5535208-100, R
IRECTION
8-9-7-1 HDD removal
If the HDD has patient data, leave the HDD at the site.
Table 8-144 HDD removal
1.
Loosen the thumb screws or screws at the top of the BEP cover, or the three screws that attach
the cover to the BEP.
Tilt the top of the BEP cover away from the BEP.
2.
Disconnect the battery from PCN1 on the
the CB (ChargeBoard).
3.
Disconnect HDD Power cable (1) and
SATA cable (2).
. 2
EV
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
ERVICE
Corresponding Graphic
BEP6 CB cables
HDD cable connections
M
ANUAL
8 - 231