GE LOGIQ E9 Service Manual page 524

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5535208-100, R

Table 8-109 Removing and Cleaning Filters

Filter Locations

A. Rear Filter - Remove the

Cover and then remove the filter.

B. Bottom Filter - Remove the

Filter Assembly by lowering the

NOTE: The handle for the bottom

filter is located in the same

location for both Filter

Clean the Rear Filter after it is

removed by removing excess lint

or dust from the soiled side; or

vacuum if necessary.

Section 8-7 - Main Console parts replacement

Corresponding Graphic