GE LOGIQ E9 Service Manual page 122

GE
D 5535208-100, R
IRECTION
3-9-4-5 How to Setup and Use a DICOM Worklist Service
A Worklist provides a repository of data for patients scheduled for an exam. The can query and filter
the entries of the Worklist and retrieve one or more of them to create a patient for each with an initial
exam.
Worklist Setup
To setup a Worklist Service on the , follow these steps:
Table 3-17
1.
2.
3.
4.
5.
6.
7.
8.
9.
3 - 58
. 2
EV
Worklist Setup
In Utility -> Connectivity -> Service, from the Destination Device drop-down menu, select the
device on which the service resides. (This assumes you have already setup the device in the
Device tab.)
From the Select Service drop-down menu, select DICOM Worklist and press Add.
Change the name of the service to one of your choosing.
Enter the AE Title and Port Number of the service. AE Title is case-sensitive.
Maximum Retries, Retry Interval and Timeout have the same use as with DICOM Image
Storage Services. See:
Set Maximum Results to the maximum number of results returned. The default and
recommended setting is 100.
Search Criteria are filters that restrict the entries returned by a query to those that match all
criteria. The provides two defaults: Modality (set to "US" for Ultrasound), and Scheduled
Procedure Step Start Date (commonly known as Exam date, and set to today). Modify these
or add other criteria as you wish. These define "remote" filtering.
See: ""Remote" versus "Local" Filtering" on page
Save your changes and press Verify. A Smiley Face indicates successful communication with
the service.
Select the Don't Use checkbox when you DO NOT want to remotely filter on that search
criterion, but still WANT TO keep the tag and its value for future use.
Section 3-9 - Connectivity Setup and Tips
3-9-4-2 "Properties" on page
LOGIQ E9 S
3-45.
3-59.
M
ERVICE ANUAL