GE LOGIQ E9 Service Manual page 611

GE
D 5535208-100, R
IRECTION
Table 8-168 4D MC Reinstallation for Lambda PS
3. Route the USB Cable through the slot
in the PS.
Firmly, but gently push on the 4D MC
Cover until it is seated in place
(connected) to the PS.
Make sure the USB Cable is still in the
correct position.
Reinstall the three 4D MC Cover
screws.
4.
Put the Main PS into position so it will
be ready to be mounted.
Route the USB cable between the
Targa frame and the BEP.
. 2
EV
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
Corresponding Graphic
M
ERVICE ANUAL
8 - 265