GE LOGIQ E9 Service Manual page 364

GE
D 5535208-100, R
IRECTION
Table 8-4
9. Wait until all drivers are installed
automatically and the reboot is complete.
DO NOT PRESS ANY KEY
messages until the automatic reboot is
complete.
10. Plug in your Service Dongle to ensure that it is recognized and lights up.
From Windows, double-click on My Computer to confirm the CD/DVD drive is mapped to G:\. If
the drive is not mapped to the G:\:
From the Desktop:
a. select "My Computer."
b. Open C:\remap\newmap.
c. Double-click on newmap.bat to remap the drive.
Remove the Service Dongle.
8 - 18
. 2
EV
Software Load - R4 or later
Steps
Section 8-4 - Loading / Reloading / Upgrading the Software
, ignore all
LOGIQ E9 S
Corresponding Graphic
Restart Windows Message
M
ERVICE ANUAL