GE LOGIQ E9 Service Manual page 568

GE
D 5535208-100, R
IRECTION
8-9-5-1 BEP Side I/O Board removal
Table 8-135 BEP Side I/O Board removal
1.
Disconnect all I/O cables and all cables at the top of the BEP.
2.
Loosen the thumb screws or screws at the top of the BEP cover, or the three screws that attach
the cover to the BEP.
Tilt the top of the BEP cover away from the BEP.
3.
Disconnect:
• the battery cable from PCN1.
• the CB to PB cable from PCN2.
Place the BEP cover aside.
4.
Remove the Option Dongle, on the I/O
Board, inside the BEP.
8 - 222
. 2
EV
Steps
Section 8-9 - BEP (Back End Processor) parts replacement
LOGIQ E9 S
ERVICE
Corresponding Graphic
BEP6 CB cables
Option Dongle
M
ANUAL