Functional / Post Repair / Preventative Maintenance Checkout Procedures; Tools Required; Checkout Procedures - GE T2100-ST1 Service Manual

Functional / Post Repair / Preventative
10
Maintenance Checkout Procedures
This chapter identifies the tools and checkout procedures that
need to be performed to ensure the T2100-ST Series treadmills
and individual components are functioning properly and safe to
use. These procedures are performed after completing any
repair, exchange, or preventative maintenance procedure.

Tools Required

All or some of the following tools may be required to perform the
various checkout procedures. For a list of which tools are
required for each procedure, refer to "Procedural Lists" on page
185.
1.
2.
3.
4.
5.
6.

Checkout Procedures

The following topics detail the individual checkout procedures.
For a list of which procedures to perform after completing each
repair or preventative maintenance procedure, refer to
"Procedural Lists" on page 185.
2097937-002 Rev G
11 March 2019
Applicable service and/or operator manual, as needed.
Standard hand tools.
Anti-static wrist strap.
Leakage tester.
Multimeter.
T2100-ST Series Calibration software.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
10
181