Mac 5500 St Connection And Setup - GE T2100-ST1 Service Manual

10.
11.
12.

MAC 5500 ST connection and setup:

NOTE:
2097937-002 Rev G
11 March 2019
Ensure the Treadmill Model is set to T2100.
Ensure the COM port number is set to the port number as
identified in step 5.d, above.
If necessary, change the number to match.
Click OK to close the System Configuration window and
return to the CardioSoft or CS initial screen.
If needed, the CardioSoft/CS operating instructions should
be referenced for controlling the treadmill with the CASE
application.
Prior to starting this section, confirm the MAC 5500 device
contains the ST (Stress Test System) option. The device can
be identified by the two additional rows of keys on the
keyboard, as shown (1) in the following illustration.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Assembly and Setup
53