GE T2100-ST1 Service Manual page 162

Calibration
2.
162
http://supportcentral.ge.com/products/sup_products.
asp?prod_id=20335
NOTE
A Single Sign On (SSO) user ID and password are
required to log on to the site.
b. In the Product Support box, select Carts-Stress
Software under the Tools heading.
GE Libraries opens to the Carts-Stress folder.
c. Select Software Library > T2100 ST1 and ST2 Treadmill
and download the correct version of the calibration
software.
There are two versions of calibration software:
T2100-

ST_Series_Calibration_Software_1_0_1_5.zip
This version of the software is for calibrating
firmware version 1.57. If the T2100-ST treadmill
Firmware has been upgrade to V1.66 this
software is no longer compatible.
T2100 ST1 and ST2 Calibration Software

_1_0_1_8.zip
This version of the software is for calibrating
firmware version 1.59+ thru 1.1812+.
For more information, refer to T2100 ST1 and ST2
Calibration Software Information.docx, also found at
this location.
NOTE
Service personnel can also call Technical
Support to receive the calibration software via
email.
To install the T2100-ST Series calibration software, extract
the zip file and double-click setup.exe as located in the
previously chosen directory.
NOTE:
The following instructions are for a PC running
Windows 7. The basic instruction flow should be the
same for Windows 8 and 10, although the screens
may vary. If necessary, refer to Appendix B,
"Reference Documents", for a list of reference
documents that contain helpful OS-specific guidance.
Application Install – Security Window
The
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
opens.
2097937-002 Rev G
11 March 2019