Replacing The Front Roller - GE T2100-ST1 Service Manual

Replacing the Front Roller

Tools Required
o
o
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
2097937-002 Rev G
11 March 2019
1/4" Hex Socket or Flat Blade Screw Driver
3/16" Hex Wrench or Hex Socket
Approximate time to complete: 40 min
Turn the treadmill main power switch to the OFF position.
Unplug the treadmill from the wall receptacle.
Allow the treadmill to discharge for 1 minute.
Remove the (5) hood-securing bolts.
Remove the hood and set it aside.
With the 3/16" Allen wrench or socket, remove the button
head Allen bolt securing the left and right end caps from
the rear of the treadmill.
Remove the end caps and set them aside.
With the ¼" Allen wrench or socket, completely remove the
left and right tension bolts from the rear roller.
When removing the tension bolts, maintain equal tension
on the bolts to avoid stripping the threads on the tension
bolt or roller.
Push the rear roller forward as far as it will go.
With the ¼" Allen wrench or socket, remove the bolt
securing the front roller to the treadmill frame.
Push the front roller from the right side of the treadmill to
the left side, lift the roller up; slip the timing belt off the
front roller, and lift the front roller up and out of the
treadmill.
Use caution to avoid pinching the timing belt.
Bolt 5/16-18 x 2" Lg
Lock Washer 5/16"
Flat Washer 5/16"
Front Roller
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Component/FRU Removal and Replacement
131