Location - GE T2100-ST1 Service Manual

Item
1
2
3
4
5
6

Location

Place the T2100-ST1 or T2100-ST2 on a firm and level hard
surface that is free of tile grout lines. The illustration below
shows the minimum recommended clearances from the
treadmill edges to any obstruction for dismount and safety
purposes. Observe that the operator should be stationed by the
Emergency Stop Button (ESB).
WARNING:
The T2100-ST1 and T2100-ST2 treadmills conform to FCC
class B rating for electromagnetic emissions. It is
recommended not to place the treadmill closer than 5ft.
(1.5m) from sensitive electronic devices within the room or
in an adjacent room. If an interference problem occurs,
move the treadmill farther away from the sensitive device
or relocate either device to another area, or consult with an
EMI specialist for ways to shield the room from
electromagnetic radiation.
Do not place it on thick or long-pile carpeting. Such
carpeting could cause instability or static build-up, and
2097937-002 Rev G T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
11 March 2019
Description
Operating Position
Shipping Position
Insert (2) washer and bolts each side
Insert (2) caps each side
Pivot Point
When folding handrails apply cardboard between
frame and handrail to prevent handrail damage.
Assembly and Setup
37