Installing The Serial Drivers - GE T2100-ST1 Service Manual

3.
4.

Installing the Serial Drivers

This section describes how to install the USB Serial Drivers on the
field service engineer's PC in preparation for running the
Calibration Software. Compatible PC OSes are Windows 7, 8, 8.1,
and 10 (both 32 bit and 64 bit).
NOTE:
2097937-002 Rev G
11 March 2019
Install
Click .
With a successful software installation, the software starts
automatically.
In preparation for the next section, close the T2100-ST
Series Calibration Software window.
This section can be skipped if the USB Serial Drivers are
already installed on the PC being used. If already installed,
proceed to "Software Interface Instruction T2100-ST Series
Calibration" on page 167.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Calibration
163