GE T2100-ST1 Service Manual page 55

1. Turn the power OFF at the treadmill.
2. Connect one end of the RS232 serial cable (GE part
3. Connect the other end of the RS232 serial cable (GE part
4. Make sure the treadmill is connected to AC power.
5. Turn the power ON at the treadmill.
6. If necessary, turn on MAC 2000 ST with the power button
2097937-002 Rev G
11 March 2019
MAC 2000 ST (Keyboard)
number 2097829-110) to the RS232 COM port located on
the lower front panel of the treadmill.
number 2097829-110) to the COM B port on the MAC 2000
ST unit.
MAC 2000 Rear View
on the keyboard.
Refer to the MAC 2000 operator's manual for instructions
on conducting an exercise stress test.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Assembly and Setup
55