Replacing The Right Or Left Handrail - GE T2100-ST1 Service Manual

8.

Replacing the Right or Left Handrail

Tools Required
o
o
o
o
o
NOTE
1.
2.
3.
4.
2097937-002 Rev G
11 March 2019
Fig. C
Reverse step 1 through step 7 to reinstall the STS assembly.
1/8" Allen Wrench
5/32" Allen Wrench
5/16" Allen Wrench
Flat head screwdriver
Grounding Wrist Strap
Approximate time to complete: 30 min
When replacing all the handrails, remove the center
handrail before proceeding with the left and right
handrails. See "Replacing the Center Handrail" on page 153
for instructions.
Turn the treadmill's power switch to the OFF position.
Unplug the treadmill from the wall receptacle.
Allow the treadmill to discharge for 1 minute.
Remove the ESB or STS assembly.
See "Replacing the Emergency Stop Button (ESB)" on page
148 or "Replacing the Stop Tether Switch (STS)" on page 150
for instructions.
CAUTION:
Use ESD precautions, including wearing a grounding
wrist strap that is connected to an exposed metal
connection point on the treadmill chassis.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Component/FRU Removal and Replacement
Outside Terminal Contact
STS Connection on
outer spade blades.
151