Replacing The Hood - GE T2100-ST1 Service Manual

o
o
o
o
o
Accessories
o
o
o
o
o
o
o
o

Replacing the Hood

Tools Required
o
1.
2.
3.
4.
5.
6.
2097937-002 Rev G
11 March 2019
Ratchet
Ratchet extension 6"
(2X) Medium length long nose pliers
Wire Cutters or Utility knife
Pliers or adjustable wrench
Grounded wrist strap
Service Grease (PN 2097829-072 tube received with treadmill)
Tape measure
Computer or laptop
Calibration Program (T2100-ST Series Calibration Software)
Stop watch or watch with a second hand
Chalk or some other temporary marking device
Serial or USB Communication Cable
1/4" Hex Socket or Flat Blade Screw Driver
Approximate time to complete: 10 min
Turn the treadmill's power switch to the OFF position.
Unplug the treadmill from the wall receptacle.
Allow the treadmill to discharge for 1 minute.
Remove the 5 hood-securing screws (2 on the front and 3
on the back side of the treadmill).
Remove the hood and set it aside.
Reverse the procedure to reinstall hood.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Component/FRU Removal and Replacement
(5) Screw HHWHTS #8-32 x 3/8" Long
125