Preventive Maintenance; Daily Maintenance - GE T2100-ST1 Operator's Manual

Preventive Maintenance

5
Regular cleaning and maintenance is essential to keep your T2100-
ST1 and T2100-ST2 treadmills operating at their best for many
years. We recommend that you record all maintenance and service
in a log (as shown in Appendix A).
CAUTION
To preserve the condition of your warranty, make sure that all
repair procedures (other than normal maintenance) are performed
by an authorized and qualified service provider. Contact your local
GE customer support representative.
Use only authorized replacement parts. Using other parts may void
your warranty and may cause your T2100-ST1 or T2100-ST2
treadmill to malfunction.

Daily Maintenance

 Wipe the treadmill to remove soil, moisture, and perspiration.
 Clean the hood and handrails with a soft cloth, dampened with
 Remove stubborn stains and scuff marks with a nonabrasive,
 Ensure that the treadmill is functioning properly.
 Visual inspection of mill and walking belt for damage and wear.
2097937-001 Rev E
12 June 2017
Before cleaning the T2100-ST1 and T2100-ST2 treadmills, turn
the main power switch to OFF, and disconnect the treadmill
from its power outlet. Never use wet cleaning materials near a
power source: Since there is a risk of electrical shock, this
should be a Caution.
a solution of warm water and mild detergent.
industrial strength cleaner, such as Formula 409
cleaners on a terrycloth-type cloth (avoid spraying cleaner
directly onto the treadmill).
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
5
. Spray all
®
39