Responsibility Of The Manufacturer; Mobile Rf Communications Equipment And The T2100-St Series Me Equipment And Me Systems That Is Not Life-Supporting - GE T2100-ST1 Service Manual

Table 4: Recommended Separation Distances between
portable and mobile RF Communications equipment
and the T2100-ST Series ME Equipment and ME Systems
that is NOT Life-supporting
Max Output
Power
(Watts)
0.01
0.1
1
10
100

Responsibility of the Manufacturer

Full-Vision, Inc., is responsible for the effects of safety, reliability,
and performance of the treadmill only if the following conditions
are met:
• Assembly operations, extensions, readjustments,
modifications, or repairs are carried out by GE Healthcare
which is authorized for service and installation.
• The electrical installation of the relevant room complies with
the requirements of the appropriate local, state, and other
government regulations.
• The equipment is used in accordance with the instructions
for use.
2097937-002 Rev G
11 March 2019
The T2100-ST Series is intended for use in the
electromagnetic environment in which radiated
disturbances are controlled. The customer or user of the
T2100-ST Series can help prevent electromagnetic
interference by maintaining a minimum distance between
portable and mobile RF Communications Equipment and
the T2100-ST Series as recommended below, according to
the maximum output power of the communications
equipment.
Separation (m)
150kHz to 80MHz
D=(3.5/V1)(Sqrt P)
0.11667
0.36894
1.1667
3.6894
11.667
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Separation (m) Separation (m)
80 to 800MHz 800MHz to
2.5GHz
D=(3.5/E1)(Sqrt P)
D=(7/E1)(Sqrt P)
0.11667 0.23333
0.36894 0.73785
1.1667 2.3333
3.6894 7.3785
11.667 23.333
Introduction
17