GE T2100-ST1 Service Manual page 46

Assembly and Setup
3.
4.
5.
6.
CASE Initial Screen
7.
8.
46
Referencing the CASE rear I/O connector panel label, take
note of the COM port number plugged into.
Make sure the treadmill is connected to AC power and
turned on.
If necessary, turn on CASE with the power button on the
side panel.
The program will start up automatically and the Windows
screen opens.
Log in when prompted.
Refer to the CASE Operator's Manual for logon instructions.
If not already in the software application, double-click the
CASE icon.
The CASE initial screen opens.
NOTE:
Depending on the version of software and user
preferences, the initial screen will vary.
On the upper right side of the screen, click the System
Configuration button.
Depending on the version of software the button may look
like one of the following:
The System Configuration window opens.
Click the Devices tab.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V 2097937-002 Rev G
11 March 2019