Assembly And Setup; Safe Handling Guidelines - GE T2100-ST1 Service Manual

Assembly and Setup

3
The T2100-ST1 and T2100-ST2 treadmills are shipped fully
assembled and packaged in a folded condition. They are
designed to pass through a standard 36" door opening
measuring at least 35½". It will be necessary to remove the door
from the jam in most cases if the door is not capable of opening
fully parallel to door opening. After you have unpacked the
treadmill and secured the handrail assembly to the frame, move
the treadmill to the area by rolling it on its front wheels. If your
treadmill must pass through a door opening less than 36" wide,
additional disassembly by removal of the handrails is required.
Refer to "Removing and Reinstalling the Handrails for Moving" on
page 154. This task should be performed by an authorized
service provider to ensure that the T2100-ST1 and T2100-ST2 are
properly reassembled and functioning correctly.

Safe Handling Guidelines

WARNING
2097937-002 Rev G
11 March 2019
The T2100-ST1 and T2100-ST2 treadmills each weigh 425
lbs. When lifting the rear of the treadmill and rolling it on
its front wheels, you are moving 132 lbs. This can be
accomplished by one person, but each installer must
evaluate whether he or she is capable of moving this
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
3
35