Drive Belt Tension Adjustment; Test Plug Procedure; Communication Ports - GE T2100-ST1 Service Manual

Drive Belt Tension Adjustment

The drive belt tension has been pre-set at the factory to
minimize maintenance. If there are indications that the drive belt
has stretched and become loose, refer to "Drive Belt Tension
Adjustment" on page 60. Symptoms of a stretched drive belt
could include increased noise.

Test Plug Procedure

Each T2100-ST1 and T2100-ST2 treadmill includes an RS-232 test
plug that enables you to test the operation of the treadmill
without the host controlling device attached. The plug is located
on the left side of the treadmill secured to the frame by Velcro
The plug is to be used only for testing the treadmill. Do not stand
on or use the treadmill while testing.
Item
1
2
3
4

Communication Ports

The communication ports are located at the very front of the
treadmill near the center of the unit.
Two ports are offered with equal communication capability. The
standard female RS232 port and a USB Type B port offer
connectivity diversification.
2097937-002 Rev G
11 March 2019
1
Description
Test Plug Location on Left
Circuit Breaker Array
Incoming Power Cord
Main Power Switch
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Assembly and Setup
.
®
2
3
4
43