GE T2100-ST1 Service Manual page 2

Publication Information
The information in this manual applies only to the T2100-ST1 (GE PN 2097357-001) and T2100-ST2 (GE PN
2097357-002) treadmills. It does not apply to earlier versions. Due to continuing product innovation,
specifications in this manual are subject to change without notice.
T2100-ST1, T2100-ST2, CASE, CardioSoft, and MAC are trademarks owned by GE Medical Systems
Information Technologies, Inc., a General Electric Company going to market as GE Healthcare. All other
marks are the properties of their respective owners.
This product complies with the regulatory requirements concerning medical devices from the following
bodies:
The T2100-ST1 and T2100-ST2 treadmills meet the following safety and regulatory standards for FDA
Class 1 motor operated physical medicine machines. They have been tested by Intertek Testing Services
N.A Inc., and are listed by Engineering Testing Laboratories (ETL). However, the ultimate conformance to
IEC 6060-1 2005-3 edition is the responsibility of the system integrator when combined with other
rd
equipment. Additionally, all motorized equipment is potentially dangerous if used incorrectly. Before
using the T2100-ST1 or T2100-ST2 treadmill, follow all precautions listed in this manual and read the
entire operator's manual thoroughly. Use the T2100-ST1 and T2100-ST2 treadmills only as described.
Revision History
The document part number and revision appear at the bottom of each page. The revision identifies the
document's update level. The revision history of this document is summarized in the following table.
Revision Publication Date
A 20 August 2016
B 9 September 2016
C 18 November 2016
D
4 April 2017
E 12 June 2017
F
27 June 2018
22 January 2019
G
To access other GE Healthcare manuals, go to the Common Documentation Library (CDL), located at
http://apps.gehealthcare.com/servlet/ClientServlet?REQ=RNEW&MODALITY=Cardiology.
2
Description
Internal release
Initial public release
Power cord configuration
Updated eStop button
Added power cord configuration
Revised regulatory & safety conformance
Added EMC Declaration and 4
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Edition Configuration
th
2097937-002 Rev G
11 March 2019