GE T2100-ST1 Service Manual page 164

Calibration
NOTE:
1.
2.
3.
4.
164
Do not plug any hardware including the treadmill USB
cable into the PC until this step is completed.
Locate the flash drive (p/n 317-160-313) shipped with the
T2100-ST series treadmill and insert into a USB port of the
PC.
Browse the flash drive and locate the file named
CDM21218_Setup.exe and double click on it to start the install.
NOTE:
Do not download the driver from the FTDI website.
NOTE:
The following instructions are for a PC running
Windows 7. The basic instruction flow should be the
same for Windows 8 and 10, although the screens
may vary. If necessary, refer to Appendix B,
"Reference Documents", for a list of reference
documents that contain helpful OS-specific guidance.
If prompted Do you want to allow the following program to make
changes to this computer, verify the program name,
CDM21218_Setup.exe, and publisher, Future Technology Devices
International, Ltd, and click Yes.
The Driver Extract window opens.
Click Extract.
Device Driver Installation Wizard
The
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
opens.
2097937-002 Rev G
11 March 2019