Communication Ports; Floor Surface Footprint; Operating And Storage Condition Recommendations; Power Requirements - GE T2100-ST1 Service Manual

• MasterTrack
• Cushioned running deck absorbs shock of foot falls
• Self-lubricated and reversible running deck
• Step-up height (7 in. / 18cm from floor)

Communication Ports

• RS232 Female Serial port
• USB 1.0 "B" port

Floor Surface Footprint

33.0 in x 78.5 in, 84cm x 200cm level surface. (See "Location" on
page 37.)

Operating and Storage Condition Recommendations

• Operating Temperature Range: 4.5° to +38° C (+40° to +85°
F)
• Storage Temperature Range: -40° to +70° C (-40° to +158° F)
• Operating and Storage Relative Humidity Range: 10% - 90%,
non-condensing
• Altitude: -50 to 9,842 feet (-15m to 3000m); derate
performance by 5% per each additional 500 feet (152m)
above 5,280 feet (152m)

Power Requirements

The T2100-ST1 is designed to operate on dedicated 100-130 VAC
20-amp power, and the T2100-ST2 is designed to operate on
dedicated 200 to 264 VAC 13-amp power. Make sure that the
treadmill is connected to an outlet that looks like one of the
following illustrations.
• T2100-ST1 Power Consumption: 1934 watts (6600 BTU), 20
amps
• T2100-ST2 Power Consumption: 2580 watts (8804 BTU), 13
amps
This product is equipped with a three-wire grounding-type plug.
The plug will only fit into a grounding-type outlet. This safety
feature must not be disabled. Contact a qualified electrician if
you are unable to insert the plug into your outlet, or uncertain if
the outlet meets local electrical codes. Polarized outlets such as
NEMA 5-20, CEE7/7, and BS1363 must be verified for proper
polarity configuration before plugging in the T2100-ST1 or
T2100-ST2. Incorrect polarization of the outlet could cause
failure of onboard electrical components or cause electrical
2097937-002 Rev G
11 March 2019
running belt tracking system
®
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Product Overview
31