Archive Content; Memory Capacity; Delete Updates Archive - Honeywell EK280 Applications Manual

EK280
i
The update archive is not a flexible archive.

9.7.1 Archive content

Pos. Address Display
1 01:01F8 GONo
2 08:0A20 ABNo
3 01:0400 Time
4 02:0197 NVers
5 01:0198_1 SigRL
6 01:0198_2 SigRH
7 02:0198_1 SigSL
8 02:0198_2 SigSH
9 08:0811 User
10 08:0812 Reslt
11 08:0A21 Check
The values can be retrieved in accordance with the information in the table via D = display and/or
1
I = interface.

9.7.2 Memory capacity

The archive can store the last 20 updates or update attempts on the device software.
i
The updates archive is not a ring-type memory.
If the archive is full, then the archive must be deleted in order to carry out further updates or to
attempt to do so ( chapter 9.7.3).

9.7.3 Delete updates archive

i
The update archive is also deleted via the function "ClrV" ( chapter
archives ("Clr.V")).
− So that the updates archive is deleted from the device, open the calibration lock as described in the
 EK280 Operating Instructions [1].
− Move the cursor to
− Press the ENTER key. ⇒ "0" flashes.
− Change the value using the arrow keys  or  to "1".
Application Manual
Global Block number
Archive Block number
Date and time
New firmware version
Firmware signature part 'R', low part
Firmware signature part 'R', high part
Firmware signature part 'S', low part
Firmware signature part 'S', high part
User who started the firmware update
Result entries of the software updates
Check sum result ( „CRC OK" or „Error")
"Serv." > "Archives" > "ClrUL".
Description Retrievable
1
S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
2.4.2 Clear volumes and
207