Setting The Number Of Tabs; User Values For The Customer - Honeywell EK280 Applications Manual

EK280

2.1.2 Setting the number of tabs

With the calibration lock open, on the "Ctrl." display tab the
tabs displayed.
"Menu"
Description
2 registers The Main
3 registers The Main,
4 registers The Main, Cust.,
5 registers All Main, Cust., Admin,
- This option is system-generated and is not intended for use. It works in the same
way as

2.1.3 User values for the customer

i
For parameterization of the EK280 you need a connection cable for the optical interface as well
as the enSuite program. enSuite can be downloaded free of charge from the Honeywell website
in the "Software Downloads" section:
www.elster-instromet.com/en/software-downloads
All values displayed on the "Cust." tab, can be set using enSuite:
− Connect a PC or laptop with enSuite installed to the EK280 optical interface using the connection
cable.
− Start enSuite and set up the communication link to the EK280.
( chapter 3.1 Setting up the communication link to the EK280 via optical
− Select "Navigation" on the left-hand side and then
navigation window.
− In the top of the device window open the path "Parameters" >
clicking on the relevant plus signs, and then select
− By using the "All
values are to be displayed. To do this, press an entry in the "Value" column, and then the button with
the three dots. You can now select a new value to be displayed for this position in the display in the
window that opens up.
− Once you have set all values, click on the
window.
Application Manual
and Ctrl. tabs will be displayed.
Cust. and Ctrl. tabs will be displayed.
Admin and Ctrl. tabs
Serv. and
"2 registers" ( above).
Parameters" tab in the right-hand part of the window, you can now select which
"Menu" value allows you to select the number of
will be displayed.
Ctrl. tabs will be displayed.
"Parameterize online" at the bottom of the
"Device
"User column 'Customer'".
"Transfer changes to device" icon at the top of the enSuite
interface, p. 19)
settings" > "Display" by
9