Honeywell EK280 Applications Manual page 49

EK280
− Press "OK" to accept the setting.
− For a message range (e.g., all alarms"), the switch "Message range" must be activated.
− Then the first two lines for example (report 1 and 2) may be marked. These are color marked:
red = Alarm ; yellow = Warning ; gray = Information
− Consequently every alarm would lead to output switching.
− Press "OK" to accept the setting.
− After confirmation, the speed button
transmit the values finally to the EK280.
Application Manual
"Transfer changes to device" in enSuite must be used to
47