Honeywell EK280 Applications Manual page 112

EK280
− Start the ModemIni program (V3.50 or later) and perform the following settings:
- terminal device: EK280
- Modem box: EM260
- Modem module: GSM-Modem
- PC interface: COMx (the COM interface, to which the parameterization cable is connected)
− Press the button "Parameterize" so as to transfer the parameters to the GSM Modem. The
successful end of the transmission is signaled with the message
− Terminate the "ModemIni" program.
Application Manual
DANGER!
Be sure to close the housing of the EM260 securely before switching on the
power supply"
"Parameterization
OK"
110