Honeywell EK280 Applications Manual page 46

EK280
i
The cycle duration and the pulse duration can be set as a multiple of 125 ms for each output.
The cycle duration must always be longer than the pulse duration.
The maximum output frequency is 4 Hz
Examples
Period
Per.O in ms
2 250
4 500
8 1000
80 10000
− When in the corresponding output menu press the key  until "PerO1", "PerO2",
"PerO4" is displayed.
− Press the ENTER key. ⇒ The actual parameterized value flashes.
− Move the cursor to the digits using the  or  arrow keys and update them using the  or  arrow
keys to set the desired period.
− Press the ENTER key to confirm the value setting. Input can be canceled using the ESC key.
− When in the corresponding menu press the key  repeatedly until "PW.O1", "PW.O2",
"PW.O4"" is displayed.
− Press the ENTER key. ⇒ The actual parameterized value flashes.
− Move the cursor to the digits using the  or  arrow keys and update them using the  or  arrow
keys to set the desired period.
− Press the ENTER key to confirm the value setting. Input can be canceled using the ESC key.
e) Setting up access permissions for the output parameters:
i
Parameterization of access authorizations for the output parameters via the EK280 keyboard is not
possible!
Parameterization may be done with enSuite in
"Output 1" to Output
Application Manual
Pulse width Output frequency
PW.O in ms
1 125
2 250
4 500
40 5000
4".
in Hz
4
2
1
0.1
"Parameterize online" > "Parameters" > "Outputs" >
44
"PerO3" or.
"PW.O3" or