Honeywell EK280 Applications Manual page 187

EK280
Display Designation
IPAdr OwnIpAddress
Port OwnTcpIpPort
DNS12 Dynamic Name Server 1
DNS22 Dynamic Name Server 2
i
Evidently, the correct APN data must be parameterized in order to establish a TCP connection.
The values entered above serve as dummy data, which must be overwritten with the correct
data.
Telephone book parameters
Display Designation
Name Telephonbook_Name
Serv. Telephonbook_Sever
Port Telephonbook_ServerPort
Login Telephonbook_ServerUserNam
e
Passw Telephonbook_ServerPassword
i
Dummy telephone book data is entered in the above table. Such data must naturally be
overwritten with the correct parameters to enable communication to take place.
The same Modbus master task list is parameterized for operations via an internal modem as for operations
via the terminal device ( chapter 8.2.6).
The parameterized trigger event must take place for communication to start. For testing communication, the
device on link 7 with parameter 7:D71 can be set with the brief description "TestC" to 1. The connection is
then started as a test. Otherwise there will be a wait until the parameterized trigger event takes place.
"x" = Instance of the telephone book (value range from 1-10)
50
Application Manual
Address Value
3:783
3:784 40000
3:794 10.1.2.201
3:795 10.1.2.202
Table 15: Access-Point-Parameter
Address
"x" 50
x:D20 MdBusMast
er TCP_x
x:D27 10.1.13.251
x:D28 37357
x:D29 unknown
x:D2A unknown
Table 16: Telephone book parameters
Content
Own IP address, this value is not
parameterized
Own port, via which a distant
client can create a TCP/IP
connection. This port must also be
known to the retrieving (client)
system!
Optional indication
Optional indication
Value Content
IP address of the server to be
dialed
User name (with necessary
authentication on the server)
Password (with necessary
authentication on the server)
185