Honeywell EK280 Applications Manual page 83

EK280
− First the name of the VPN that you have allocated yourself will appear. Complete the remaining,
initially empty fields with the access data for your VPN which you will obtain from your VPN
administrator or from the GPRS network provider. Use the
and the window is closed.
Now, in the dialog box
−
can be used to initiate the transfer of the values to the modem.
Transfer of these values to the ComTSC modem takes approx. 2 to 2.5
−
minutes. The completion of complete parameter transmission is
indicated with the message
− If configuration was executed via the local modem configuration
interface, then the USB parameterization cable must also be
disconnected from the EK280 after the connection is terminated.
7.1.7.4 Checking GSM field strength
 Chapter 7.1.4.2 Checking GSM field strength
7.1.7.5 Retrieving data with enSuite
a) Opening the test time window for the following test retrievals with enSuite
i
The test time window only needs to be open if none of the time windows 1 to 4 are open.
− If the communication link to the EK280 via the optical interface is not set up, it must be created.
( chapter 3.1 Setting up the communication link to the EK280 via optical
− Select "Navigation" on the left-hand side of the enSuite window and then
the bottom of the navigation window.
Application Manual
"Settings for the application
"Parameterization OK".
(p. 63)
OK key so that the data input is accepted
GPRS-TSC'" ( above) the button
interface, p. 19)
"Parameterize
81
"Set values"
online" at