Memory Capacity; Changing The Monthly Limit (= Daily Limit); Values Relating To Months - Honeywell EK280 Applications Manual

EK280

9.3.2 Memory capacity

Based on factory settings, the archive contains 24 data rows, which corresponds to a memory capacity of
approx. 2 years.
i
Monthly archive 1 is a ring-type memory. If the archive is full then the oldest entries are
overwritten.

9.3.3 Changing the monthly limit (= daily limit)

 chapter 9.2.3 Changing the daily limit

9.3.4 Values relating to months

9.3.4.1 In the current month
− To display the volumes relating to the monthly limit, move the cursor to
month".
Display
VbMPc↑ Maximum VbMP of current month
VbDyc↑ Maximum VbDy of current month
VbMoc ∆ Vb Monthly interval meter progress of the current month
VmMPc↑ Maximum VmMP of current month
VmDyc↑ Maximum VmDy of current month
VmMoc ∆ Vm Monthly interval meter progress of the current month
W.MPc↑ Maximum W.MP of current month
54
W.Dyc↑ Maximum W.Dy of current month
54
The counter progress compared to the respective previous entry is denoted with a "∆". Normally it is a flow
(consumption) in this case within a day. This, however, does not apply when an archive row is entered due
to a particular event (e.g. setting the clock or a counter, appearance of an important status message). The
meter reading flashes with the meter progress to point out this feature to the user (for further information,
refer to the instruction manual "usage as a registration device").
This value is only displayed when the
54
Device settings > Display > Menu
Application Manual
Description
"Menu option 1: With
options.
"Serv."
energy" is set. Use enSuite
200
> "Volume" > "current
Parameters >