EK280
7.4.10.5 network plug
7.4.11 FE260 with RS232 interface card
RS232 interface,
e.g. the COM port of a PC
GND
(n.c.)*
(n.c.)*
(n.c.)*
RXD
TXD
* (n.c.) = not connected
This interface card is used to communicate with PCs and other serial interface devices.
7.4.11.1 Preparation
Prerequisites for process described below:
−
Place jumper J1 into the "RS232" position. ( Fig. 16)
−
The FE260 is connected and configured as described in chapter 7.4.1.
−
The serial communication link to the PC or other device is set up.
Application Manual
RS232-Modul 73016593 V1.1
GND
RI/DSR
DTR/RTS
DCD/CTS
TxD
RxD
Jumper in position "RS232"
Fig. 16: RS232-Adapter in the FE260
144